What you did to your ACVW today?

[LooseNuts]

Didn't do anything to the Volkswagen but the Volkswagen did something to me.

[CatBox]

Nice tattoo and permenent GI Joe look too....

[TotallyVW]

Righteous!  Nice work.


Did you loose your razor?

[BuginU2]

Got the car aligned today.  Hopefully we'll have better luck than last time(bad bearings in beam).


Sent from my iPhone using Tapatalk

[LooseNuts]

Righteous!  Nice work.


Did you loose your razor?

Thx man.


And yes i lost it. Its been gone for a year. Now i just use the trimmers. 

[CatBox]

Did mykestalker do it?

[LooseNuts]

No had a dude in long beach do it.  Ryan Needles. yes its his real last name.  The shop i went to is the old shop on record in the US to still be running since here opening day. opened in 1927.    they got some really really ridicules artists in there one dude has been on the cover of tattoo ink a couple times with two complete spread centerfolds. 


here is the original script i used and he went off of.

[BuginU2]

Nice one J!

I took the '66 in for an alignment today.  Second attempt to get it straightened out - the last attempt resulted in a teardown of the front beam to replace the needle bearings with the red plastic bushing thingies.

First - a huge plug for Bill and Matt at Alignment Specialties in Aloha (http://www.alignmentspecialtiesinc.com/contact.html).  They are the only alignment shop that I know of that will touch a lowered dub. 

Bill called me with some discouraging news this morning - the passenger side of the beam appears to be bent.  Not sure how I missed that since I installed it a couple years ago.  It basically puts my passenger side wheel about half a inch further back than it should be.  They were able to get the wheels pointed in the right direction to the best of their ability.  I've never had an issue with the car pulling to one side, but I guess this gives me a good reason to start building a new front end.... when I have some money.  Fun times!

[coolblue57bug]

Just have J build you one Dwayne.

[LooseNuts]

Just have J build you one Dwayne.

  let me know.  Looks like I might be home for good I'm November. Maybe sooner.

[Matty]

2nd time EVER pulling an ACVW motor by myself, did in 30 minutes 

[BuginU2]

Why you pulling the motor?


Sent from my iPhone using Tapatalk

[corradojeff]

Nice one J!

I took the '66 in for an alignment today.  Second attempt to get it straightened out - the last attempt resulted in a teardown of the front beam to replace the needle bearings with the red plastic bushing thingies.

First - a huge plug for Bill and Matt at Alignment Specialties in Aloha (http://www.alignmentspecialtiesinc.com/contact.html).  They are the only alignment shop that I know of that will touch a lowered dub. 

Bill called me with some discouraging news this morning - the passenger side of the beam appears to be bent.  Not sure how I missed that since I installed it a couple years ago.  It basically puts my passenger side wheel about half a inch further back than it should be.  They were able to get the wheels pointed in the right direction to the best of their ability.  I've never had an issue with the car pulling to one side, but I guess this gives me a good reason to start building a new front end.... when I have some money.  Fun times!

im looking for a factory beam here soon. if you wanted i would swap ya for mine. Let me know bud

[LooseNuts]

im looking for a factory beam here soon. if you wanted i would swap ya for mine. Let me know bud

Duane's is bent

[corradojeff]

didnt notice. thanks for pointing it out