News:

The Rose City Volksters meet at 7:30PM on the 2nd Tuesday of each month at:
Beaverton Round Table
10150 SW Beaverton Hillsdale
Beaverton, OR 97005
Click here for map

 

Author Topic: VW "Aircooled" Shop Day @ Duane's  (Read 2576 times)

March 22, 2007, 11:39:35 AM

Offline BuginU2

  • President
  • Volkster
  • Hebmuller
  • *
  • Posts: 1728
  • Geheimpolizei
The current plan is to fix the wiring in Jerry's Notch on Saturday March 31st.

I may be putting an engine into my car that day as well.

Regardless, there will be some fun VW repair activities going that day.

If you are interested in stopping by and getting dirty/greasey/etc let me know and I'll post the logistics.
 

March 24, 2007, 03:53:24 PM
Reply #1

Offline TotallyVW

  • Treasurer
  • Volkster
  • Mark V
  • *
  • Posts: 1492
    • http://rosecityvolksters.com
Sounds great!  See you there.

Mark
Mark

1967 Convertible
1967 Ragtop (really)
1967 Standard Bus
1977 Rabbit
 

March 27, 2007, 08:28:03 AM
Reply #2

Offline BuginU2

  • President
  • Volkster
  • Hebmuller
  • *
  • Posts: 1728
  • Geheimpolizei
An update on the plan for Saturday.......

I will still be helping Jerry with the wiring problem on his Notch.

The engine is already in my 66.  So my focus will probably be on fixing the brakes and wiring.... maybe a valve adjustment too.

In summary, the following activities could be happening on Saturday:

Fixing the rat's nest of a wiring job in a Notch
Bleed and adjust brakes
Finish wiring job in Duane's 66
Adjust valves, adjust timing, and if I can figure it out.. adjust a PICT34
 

March 28, 2007, 03:33:45 PM
Reply #3

Offline TotallyVW

  • Treasurer
  • Volkster
  • Mark V
  • *
  • Posts: 1492
    • http://rosecityvolksters.com
Do you have an air compressor?  I know a guy that needs his rear brakes worked on and could drag him over as well.  (Big air compressor for the big nut on the drum) (Don't know what the technical name is for it, but maybe OldScool can throw some more educating our way :wink: )
Mark

1967 Convertible
1967 Ragtop (really)
1967 Standard Bus
1977 Rabbit
 

March 29, 2007, 12:08:37 AM
Reply #4

Offline BusDriver

  • Hebmuller
  • *****
  • Posts: 1523
  • I figured since it wasn't being used I'd try it on
    • http://www.rosecityvolksters.com
Ummm...Those nuts are called the big nuts that hold on the brake drums. :-)  And actually since I prefer to drive cars that can hurt you with the amount of speed they can generate in a short amount of time they use disk brakes *cough* Water Cooled *cough cough* and I am somewhat unfamiliar with the concept of drums. :-) "Oh Snap" Love you guys anyway and I'll be there to sling insults. :-)
No really...I do it for a living.
 

March 30, 2007, 04:34:43 PM
Reply #5

Offline TotallyVW

  • Treasurer
  • Volkster
  • Mark V
  • *
  • Posts: 1492
    • http://rosecityvolksters.com
Good to know.  Thanks OC.  

I got a question for BugginU2:  Is 12:00 the actual start time for this event?  See you all tomorrow.  Thanks.
Mark

1967 Convertible
1967 Ragtop (really)
1967 Standard Bus
1977 Rabbit
 

March 30, 2007, 10:52:00 PM
Reply #6

Offline BuginU2

  • President
  • Volkster
  • Hebmuller
  • *
  • Posts: 1728
  • Geheimpolizei
I'll be starting probably around 11am.... and wrapping up around 3pm.
 

March 31, 2007, 04:42:26 PM
Reply #7

Offline TotallyVW

  • Treasurer
  • Volkster
  • Mark V
  • *
  • Posts: 1492
    • http://rosecityvolksters.com
That was fun!  Thanks for opening up your "shop" for a few hours.  It was a good opprotunity to get to know a few of our newer club members better.  Great idea.  We should do this sort of stuff more often.
Mark

1967 Convertible
1967 Ragtop (really)
1967 Standard Bus
1977 Rabbit
 

March 31, 2007, 08:03:03 PM
Reply #8

azilla

  • Guest
due to working differnet scheduele this week. and working graveyard I didnt wake up or I might of thought of coming just to see the people in this club. and maybe talk to people with issues with my car
might show up to meeting but its the day before daughters birthday so donno whats planned yet
 

March 31, 2007, 09:22:14 PM
Reply #9

Offline BuginU2

  • President
  • Volkster
  • Hebmuller
  • *
  • Posts: 1728
  • Geheimpolizei
I had a great time this afternoon.  

Thank you Mark for the great valve, timing and carb adjustment.

Jerry, I had a great time fixing the wiring on your Notch... hopefully it will keep working for more than five minutes.

It took a water-cooled guy to bring the liquid refreshments... thanks!

I can't wait to do this again!
 

April 02, 2007, 01:08:36 PM
Reply #10

Offline RyanB

  • Volkster
  • Mark lll
  • *
  • Posts: 432
Quote from: "TotallyVW"
Do you have an air compressor?  I know a guy that needs his rear brakes worked on and could drag him over as well.  (Big air compressor for the big nut on the drum) (Don't know what the technical name is for it, but maybe OldScool can throw some more educating our way :wink: )


That's more commonly known as a Castle nut.

I've found that even with an impact gun those nuts wont budge many times. I'd suggest getting a "torquemeister".

Btw hello everyone.
RyanB
 
66 Baja

Certified Project addict
 

April 04, 2007, 12:30:47 PM
Reply #11

gt

  • Guest
I signed on tuesday & would be charged to join in on another activity like the othed day.  Any chance of another.  I would love to pick some brain on a disk brake conversion for my newly aquired vert.
 

April 04, 2007, 12:32:29 PM
Reply #12

gt

  • Guest
I forgot to add;  while getting my hands dirty, of course.
 

April 04, 2007, 11:18:33 PM
Reply #13

Offline TotallyVW

  • Treasurer
  • Volkster
  • Mark V
  • *
  • Posts: 1492
    • http://rosecityvolksters.com
These "Shop Days" are fun and I wouldn't mind more of them myself.  If anyone would like to host one that would be fine.  Once my race car is done and my garage is a little cleaner I would gladly host another (had one last summer).  

...what kind of "vert" GT?
Mark

1967 Convertible
1967 Ragtop (really)
1967 Standard Bus
1977 Rabbit
 

April 05, 2007, 09:10:13 AM
Reply #14

Offline RyanB

  • Volkster
  • Mark lll
  • *
  • Posts: 432
I'm probably a good distance away for anyone to drive to. But on any given weekend if I am not camping, then I am out in the garage working on my MANY projects.

74 Thunder Buggy
Sand Rail
66 Baja Bug
66 VolksRod
74 Mid Travel Manx

Yes, I have too many projects.  I also have a 69 Ghia (That I need to sell), a Tent trailer (That I need to sell) and a 21 Ft Boat that I need to work on as well.

 :roll:

Right now I am in high hear for the Thunder Buggy. Trying to get it ready by memorial day for Sand Lake. The Rail is ready.   :twisted:
RyanB
 
66 Baja

Certified Project addict
 

 


 
SimplePortal 2.3.3 © 2008-2010, SimplePortal